Tips on How to Improve Water Pressure in Your Home

Tips on How to Improve Water Pressure in Your Home

Tips on How to Improve Water Pressure in Your Home - A Guide by Tony's Drain and Sewer Cleaning

Water pressure problems can be frustrating and can result in ineffective cleaning and showering. Low water pressure can cause inconvenience and reduce the efficiency of daily activities. Tony's Drain and Sewer Cleaning, a professional plumbing service, offers some helpful tips on how to improve water pressure in your home.

Test your water pressure:
Water pressure test gauges are available at local home improvement stores. Turn off any appliances that might be using water, and attach the gauge to an outdoor hose spigot. A reading of less than 60 psi indicates low water pressure. Ideally, the reading should be between 60 and 75 psi, while a reading above 80 psi can be detrimental to plumbing fixtures and pipe joints over time.

Ask around: Check if your neighbors or landlord are experiencing similar issues. If they are, contact the local water provider. If you have well water, your well pump might be causing the problem.

Check the water meter, shut-off valve, or regulator: Ensure that the water meter and the main shut-off valve at the street are both fully open. Check the water pressure regulator too, as poorly functioning regulators can lead to gradual drops in water pressure.

Check for leaks: Leaks reduce water pressure and can cause water damage to walls, ceilings, and other parts of your home. Check your water meter by turning off all water sources and recording the reading. Wait for 20 minutes and check the meter again. If the reading has changed, you have a leak. Look for leaks in the tank parts of your toilets, under kitchen and bathroom sinks, and around your water heater and washing machine hoses. Tony's Drain and Sewer Cleaning can help locate and repair every type of water leak in and around your home.

Check your faucets: If your water pressure is low indoors, check your faucets and showerheads. Mineral buildup on fixtures can affect water flow, while loose or worn out washers can cause leaks and reduce water pressure.

Consider clogged pipes: Years of buildup and residue inside your water supply pipes decrease the amount of water flowing through, reducing water pressure. This is a common problem with iron and galvanized pipes. If you have thoroughly cleaned and removed mineral deposits from faucets and showerheads, and you cannot find any leaks, it’s time to call in a professional plumber from Tony's Drain and Sewer Cleaning to assess the pipes in your home and determine whether extensive buildup is affecting your water pressure.

If you have low water pressure, check all of the strainers on your faucets to make sure they are not blocked and remove them annually to check for mineral buildup. Check your main valve and the meter valve to make sure they are not half-way open or stuck in a closed position. If you have galvanized metal piping, calcium and mineral deposits could be the problem. These deposits reduce the internal diameter of the pipe and slow down the water like rocks in a stream.

In conclusion, a low water pressure issue in your home can be resolved with the help of Tony's Drain and Sewer Cleaning. The steps mentioned above can help identify the problem and resolve it. Once resolved, you can enjoy an efficient and effective water flow in your home.

The Jones family recently moved into a new home, but they were disappointed with the low water pressure in their showers and kitchen sink. They tried adjusting the faucets and showerheads, but the problem persisted. Mr. Jones contacted Tony's Drain and Sewer Cleaning for professional help.

The plumber conducted a thorough check of the water pressure and identified that the water pressure regulator was poorly functioning, causing the gradual drops in water pressure. The Tony's plumbers fixed the regulator.

Tips on How to Improve Water Pressure in Your Home Written by Tony's Drain and Sewer Cleaning

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.